Gestetner 8035e, Руководство по копированию

Страница: 42 / 172

Copying
24
2
F
Press the
{
Start
}
key.
The machine starts copying.
When placing originals on the exposure glass, press the
{
q
}
key after all
originals are scanned.
Copies are delivered face down.
Note
❒
Always log off when you have finished using the machine to prevent un-
authorized users from using the machine.
❒
To stop the machine during a multi-copy run, press the
{
Clear/Stop
}
key.
❒
To return the machine to its initial state after copying, press the
{
Clear Modes
}
key.
❒
To clear entered values, press the
{
Clear/Stop
}
key or
[ Cancel ]
on the screen.
❒
To confirm settings, press the
{
Check Modes
}
key.
Reference
“When the Authentication Screen is Displayed”, About This Machine
“Administrator Tools”, General Settings Guide
Interrupt Copy
Use this function to interrupt a long copy job to make urgently needed copies.
Important
❒
You cannot use Interrupt Copy with the scanner function, or when fax origi-
nals are being scanned.
A
Press the
{
Interrupt
}
key.
The interrupt key indicator lights.
B
The machine stops scanning. Remove the originals that were being copied.
C
Place the originals you want to copy.
D
Press the
{
Start
}
key.
The machine starts making copies.
E
When copying is complete, remove the originals and copies.
F
Press the
{
Interrupt
}
key again.
The interrupt key indicator goes off.
G
Replace the originals that you were copying, and then press the
{
Start
}
key.
Following the instructions on the display, replace the originals that you were copying.
Note
❒
The previous copy job settings are restored. Simply press the
{
Start
}
key to
continue copying from where it left off.