14
Satellite tracker
E L E C T R O N I C S E C U R I T Y S Y S T E M S
ALARM
ALARM
“sleep+pshock”; in the absence of alerts from the shake-sensor and with no current in the
ACC circuit, the device turns off the GSM and GPS detectors; the tracker will respond by sending an
SMS with the message “sleep shock ok”.
It will resume normal operation at the first impulse (call or SMS) or at the first alarm triggered by
either shake-sensor or ACC alarm.
To exclude the sleep function send an SMS with the message “sleep+pspace+off” to the
localiser.
32.3 Advanced energy saving via shock sensor
Send an SMS with the message “sleep+pdeepshock” to the tracker in alarm status; the
tracker will respond by sending an SMS with the message “sleep deepshock ok”.
If there are no vibrations, the device turns off the GSM and GPS detectors and goes into advanced
energy saving mode; the localiser cannot be activated either by SMS or call, but only by an alarm
(vibration, vehicle movement).
Once the alarm is over, the device returns to deep sleep mode.
32.4 Deactivating energy saving
To deactivate this function, send an SMS with the message “sleep+pspace+off” to the
localiser. The localiser will respond by sending an SMS with the message “sleep off ok”.
The GSM, GPS and LED detectors on the localiser will be activated.
33. Programmed activation
Send an SMS to the localiser with the message “spspace+1h”; the localiser is
activated every hour and sends the position information (“m”: minutes, “h”: hours, “d”: day). The time
interval must be a maximum of 3 digits and must be less than 30 days.
GSM and GPS are deactivated and the localiser enters power saving mode.
The localiser cannot be activated by a call or SMS, but only by events that trigger an alarm.
When the alarm is over, the localiser will return to this mode.
34. Check the status of the vehicle
Send an SMS with the message “check+password” to the tracker, which will reply with information
about the status of the power supply, the battery, GPS, ACC, doors, GSM signal to authorised
numbers.
For example: Send SMS “check123456” to the device; the following SMS reply will be sent.
• Power: On/Off;
• Battery: (detected charge level) 80%;
• GPRS: On/Off;
• GPS: OK /NO GPS;
• ACC: On/Off;
• GSM: signal level: 1-32 (Note: The higher the value, the stronger the GSM signal);
35. Checking the IMEI code
Inviare un SMS al localizzatore un SMS con scritto: “imei+password”.
Per esempio: inviare “imei123456” al localizzatore; il localizzatore invia un SMS contenente il codice
IMEI in 15 cifre.