SAFETY INSTRUCTIONS
For the benefit of the operator and his/her surroundings, the fol-
lowing safety instructions must be carefully observed.
1.
The high pressure cleaner must be earthed according to
regulations. To ensure reliable operation the earth con-
nection contact resistance must not exceed 50 ohms.
2.
Never exceed the maximum pressures and temperatures
indicated on the machine plate.
3.
In case of operational failures or when repairing - switch
off the high pressure cleaner at the mains switch and turn
off the water supply.
4.
After operation - switch off the high pressure cleaner at
the main switch and turn off the water supply. Always lock
the pistol with the safety device on the trigger when you
leave the high pressure cleaner.
5.
Use only Gerni A/S/ Nilfisk high pressure hoses. Do not
use non-Gerni /Nilfisk high pressure hoses as they do not
comply with the safety standards required by Gerni A/S.
Never attempt to repair defective high pressure hoses
yourself.
6.
The water jet is delivered from the nozzle at high speed.
Therefore, never aim the jet in the direction of people, ani-
mals, electric installations or electrical conductors.
7.
Leaks may be dangerous - contact our service depart-
ment.
8.
It is recommended that protective clothing be worn to
avoid accidental spraying of unprotected skin.
9.
Lance and pistol should always be held with both hands.
10.
Never attempt to exchange the pistol or disconnect the
hoses before the high pressure cleaner has been
switched off and the pressure has been relieved.
11.
Never allow children or unauthorised personnel to oper-
ate the high pressure cleaner.
12.
Extension cable, plug and plug socket should be impervi-
ous to water.
28
