X500pro
3D printer manual
DRAFT
German
RepRap
14 Setup Routine
In some circumstances, like recalibrating your touch-display or after updating Repetier-Server, you must
launch the setup routine.
14.1 Starting the Setup Routine
Enter the assigned IP-address of your 3D printer and add a
/setup.php
into your browser to establish a con-
nection. The first step of the set up routine will appear thereafter :
• 192.168.1.1/setup.php
If you already assigned an IP address to your printer and you want to
restart the setup routine, you must use your new IP to establish a connec-
tion XXX.XXX.X.X/setup.php .
Step 1:
In the first step, you choose the language of the installation assistant
Setup routine, step one
74/83
