X500pro
3D printer manual
DRAFT
German
RepRap
3.3 Turn 3D Printer On/ Off
Before starting the initial check-up please make sure that your printer is connected to power supply and that
the main-lid is properly closed. Furthermore check that the main switch at the back is turned on and that the
operating key is inserted and turned on
After a short initialising phase you should see the following screen on the touch display.
This chapter only contains view-ports of the display which are necessary for the initial
check-up
Please read chapter
9. Touch-Display
for a detailed overview.
The home screen gives you quick access to all functionalities that you need to operate your 3D printer in
standalone-mode.
To see the lower icons on the home screen simply swipe with you finger over the display.
If the touch display stays black, please make sure that you connected your 3D printer to the power grid and
that the main lid is properly closed.
Home-screen, Touch-Display
Please note:
The X500pro has a built-in industrial PC which needs to be shut down before turning the
3D-printer off.
In order to turn off your 3D printer please shut down Repetier-Server first. Therefore use the button
Server
Commands
. Here you can find the command
Shutdown Server.
12/83
