X500pro
3D printer manual
DRAFT
German
RepRap
In the tab
Console
you can view logs of all orders and confirmations that are sent to or received from
the 3D printer. To do this just activate the corresponding switch.
This tool is especially useful to find possible faults of the device. By activating pause
new messages will be suppressed, so that you can read your desired text section in your
leisure.
Pausing the console will not pause the current printjob.
Console, Repetier-Server
Please note:
I the EEPROM arena you have direct access to the printer´s firmware, therefore care
should be taken when changing values.
You should generally only modify these settings after consulting the support.
Incorrectly registered values can lead to a malfunctioning device or could even damage
the 3D printer.
7.6 EEPROM
You can use the drop-down menu on the right side to reach the EEPROM settings. Here you can find impor-
tant machine parameters like the size of the print bed.
Changed values will be highlighted in green until they are saved. Incorrectly registered values will be high-
lighted in red. Use the button save to adapt your changes.
39/83
