German pool WSR-1712, Руководство пользователя

Страница: 18 / 29

P.34 P.35
Description of Controls
DELICATE FABRICS – after the final two rinses with no spinning the machine stops in the final rinse stage
and the option indicators blink.
The load is held in the water in the drum, thus reducing creasing and enabling easier ironing.
WOLLENS/HAND WASH – after the final rinse the load is held in the water in the drum, thus reducing
creasing and enabling easier ironing and the option indicators blink.
To complete the cycle press the Easy Iron button and the machine will pump out the water and complete the
cycle.
If you do not want to spin the clothes and activate drain only:
- Turn the programme selector to the “OFF” position;
- Select programme drain only ;
- Switch on the appliance again by pressing the “Start/Pause” button.
E TEMPERATURE button
The Wash Temperature button allows a reduction in the wash temperature in each
programme.
Each time the button is pressed the temperature decreases until a minimum of 15°C (cold wash
).
F DELAY START button
This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours.
To delay the start, please do the following procedure: Set the required programme.
Press the button once to activate it (h00 appears on the display) and then press it again to set a 1 hour
delay (h01 appears on the display); the pre-set delay increases by 1 hour each time the button is pressed,
until h24 appears on the display, at which point pressing the button again will reset the delay start to zero.
Confirm by pressing the “START/PAUSE” button (the light on the display starts to flash). The countdown will
begin and when it has finished the programme will start automatically.
It is possible to CANCEL the delay start by taking the following action:
Press and hold the button for 5 seconds until the display will show the settings for the programme selected.
At this stage it is possible to start the programme previously selected by pressing the “START/PAUSE” button
or to cancel the process by setting the selector to the OFF position and then selecting another programme.
Warning:
If there is any break in the power supply while the machine is operating, a special memory stores the
selected programme and, when the power is restored, it continues where it left off.
Description of Controls
A Door handle
Press the finger-bar inside the door handle to open the door.
B DOOR SECURITY indicator light
The “Door Security” indicator light is illuminated when the door is fully closed and the machine is ON.
When “Start/Pause” is pressed on the machine with the door closed the indicator will flash momentarily
and then illuminate.
NOTE: If the door is not closed the indicator will continue to flash.
A special safety device prevents the door from being opened immediately after the end of the cycle. Wait
for 2 minutes after the wash cycle has finished and the “Door Security” light has gone out before opening
the door. At the end of the cycle turn the programme selector to “OFF”.
C START/Pause button
Press to start the selected cycle.
NOTE: When the “Start/Pause” button has been pressed, the appliance can take few seconds before it
starts working.
Changing the settings after the programmes has started (PAUSE)
Press and hold the “START/PAUSE” button for about 2 seconds, the flashing lights on the options buttons
and time remaining indicator will show that the machine has been paused, adjust as required and press
the “START/PAUSE” button again to cancel the flashing lights. If you wish to add or remove items during
washing, wait 2 minutes until the safety device unlocks the door.
When you have carried out the manoeuvre, close the door, press “Start/Pause” button and the appliance
will continue working where it left off.
CANCELLING THE PROGRAMME
To cancel the programme, set the selector to the OFF position. Select a different programme.
Re-set the programme selector to the OFF position.
NOTE: The option buttons should be selected before pressing the “Start/Pause” button.
D EASY IRON button
The Easy Iron function (Not available on COTTON programmes) minimizes creases as much
as possible with a uniquely designed anti-crease system that is tailored to specific fabrics.
MIXED FABRICS - the water is gradually cooled throughout the final two rinses with no spinning and then a
delicate spin assures the maximum relaxation of the fabrics.