P.31
Safety Notes
Notice for installation:
The installation must comply with the prevailing standards and regulations and conducted by qualified
technicians.
Demand for cabinet: For cabinet with oven installed, its components (plastic material and molding wood)
should be assembled by heat-resistant bonding agent (up to 100
℃
): improper material and bonding agent
will lead to deformation and incomplete adhesion. Enough space should be left for electrical connection of
household appliance. The cabinet holding the oven should be firm with enough supporting strength. Install
oven in the recession firmly. Steam oven could be installed in an in-line type cabinet or below the top of
standard cabinet, given it is ventilated adequately.
•
Take out the packaging material from chamber.
•
Water tank must be taken out if no steam is needed in the selected function.
•
Please check the integrity of the steam oven. If there is any damage, please contact customer
service & repair centre.
•
Place steam oven on an even surface with enough supporting strength.
•
Place the appliance in ventilating environment without corrosive gas around.
Warning:
The steam oven must be reliable grounded to avoid electric shock!
•
The length of power cord is 1.1m, please place the appliance near power socket within reach.
•
Disconnection of power supply must be available after installation.
Grill, saucer and food tray should
be placed on one of the four
spacer layers on spacer shelf
Zone A. Don’t put them in Zone B.
A
B
