German pool PAC-215, Руководство пользователя

Страница: 9 / 27

P.17 P.16
Ideal for hot muggy weather when you need to cool and dehumidify the
room.
To set this mode correctly:
• Press the button a number of times until the symbol appears.
• Select the target temperature18°C-32°C(64°C-90°C) by pressing
the or button until the corresponding value is displayed.
• Select the required fan speed by pressing the button.
Three speeds are available:
Maximum speed: for maximum fan power
Medium speed: reduces noise levels but still maintains a good level of comfort
Low speed: for silent operation
The most suitable temperature for the room during the summer varies from 24°C to 27°C(75°F to
81°F ). You are recommended, however, not to set a temperature below the outdoor temperature. The
fan speed difference is more noticeable when the appliance is under FAN mode but may not be notice -
able under COOL mode.
COOL mode
To set this mode correctly:
• Press the button a number of times until the symbol appears.
• Select the target temperature13°C-27°C(55°F-81°F) by pressing the
or button until the corresponding value is displayed.
• Select the required fan speed by pressing the button.
Three speeds are available:
Maximum speed: for maximum fan power
Medium speed: reduces noise levels but still maintains a good level of comfort
Low speed: for silent operation
HEAT mode
• Water is removed from the air and collected in the tank.
• When the tank is full, the appliance shuts down and “ ” (full tank) appears on the display. The
tank cap must be extracted and emptied. Run off all water left into a basin. When all the water has
been drained, put the cap back in place.
• When the tank is emptied, the appliance will start operating again.
N.B.: - When operating in very cold rooms, the appliance defrosts automatically, momentarily inter-
rupting normal operation. “ ” appears on the display.
During this operation, it is normal for the appliance to emit different noises
-In this mode, you may have to wait for a few minutes before the appliance starts giving out hot air.
-In this mode, the fan may operate for short periods, even though the set temperature has already been
reached.
When using the appliance in this mode, the air hose does not need to be
attached.
• Press the button a number of times until the symbol appears.
• Select the required fan speed by pressing the button.
Low speed: for silent operation
Medium speed: reduces noise levels but still maintains a good level of comfort
Maximum speed: for maximum fan power
Three speeds are available:
FAN mode
Operating Instructions Operating Instructions
Note : To protect the compression unit, activation will be delayed under cool mode.