USER’S MANUAL
2-16
Firewire (IEEE1394), USB, and S/PDIF Problems
The USB device does not work -
n
Windows NT 4.0 does not support USB protocols
n
Check the settings in the Windows Control Panel.
n
Make sure you have installed the necessary device
drivers.
n
Contact the device vendor for additional support.
The IEEE1394 port does not work -
n
Go to [Start > Settings > Control Panel > System >
Hardware > Device Manager]. You should see an entry
which reads `IEEE 1394 Bus host controllers`. If it does
not exist, Windows has not detected the host controller
or the device driver has not been installed properly. If
there is a yellow mark or red cross on the 1394 host
controller, there may be a device or resource conflict.
Replace / update the device driver from the factory CD-
ROM disk or consult Windows manual on how to solve
this problem.
n
Make sure the cable is fully connected.
n
Make sure you have installed the necessary device
drivers.
n
Contact the device vendor for additional support.