Section 1 GETTING TO KNOW THE BASICS
1-21
To configure the Wireless LAN function, do the following:
Go to [Start > Settings > Control Panel > Network
Connections] and right-click the Wireless Network
Connection icon and select Properties. Click Configure… and
you will see a dialogue box similar to the following.
Mode:
Select 802.11 AdHoc Mode
SSID:
Enter the same name if two or more than two
system are to establish wireless connection.
Tx Rate:
Select Fully Automatic for transmission rate
PS Mode:
Select Disabled
Channel:
Depending on your region or location, you
may enter a specific value. For example, for
North America, you may select channel 1
through 11. Go to [Start > Programs > Country
Domain] for a list of suitable channel for a
particular region.
Note:
Actual dialogue box
may be different to
what is shown here.