Gerber enVision, Руководство пользователя, Страница: 30 / 80

26 enVision Owner’s Guide
Opening the cover has the same effect as pressing the Pause-Job command.
With the cover open, you can use the slew keys to move the material so that you
can view the job. Once the cover is closed, you can re-start the job by pressing
F1 and the tool returns to where it paused.
Canceling a job
To cancel a job press CANCEL. The
,1$ %.'#4'&
message displays briefly,
then the plotter stops and returns to the MAIN MENU. Multiple jobs in the
spooler are cleared one at a time by pressing CANCEL.
Tip: When you clear a job, remember to reposition the tool for plotting the next
job.
Automatically fitting a job on the plotter
When the enVision plotter is used with GA version 6.2, a feature is available
called Autofit which automatically positions the tool head so that it cuts the
entire job. This feature only works on cut-only jobs, not EDGE print and cut
jobs. For example, if you send a 9" box to the enVision 375 plotter and the
carriage is in the middle of the Y axis, the following message appears in the
display.
If you choose Ignore and start the job, the plotter displays a message that the job
will be clipped. Only what fits on the plotter will be cut. If you choose Autofit,
the tool head moves to where the job will fit and displays a message telling you
that the job now fits. Pressing ENTER starts the job.
This feature is for vinyl cut-only jobs. If you get this message with an EDGE
job, first check the target alignment, then choose Ignore. If you choose Autofit
for an EDGE job, the cut will not be correct.
Job clipped message
If the enVision plotter is used with GA version 6.0 or earlier, if a job is too large
for the plotter it displays a "Job clipped" message. This means that the job
extends beyond the Y axis boundaries. To remove the message, press any key to
continue and start the job. If you are in Multi mode and one of the jobs is too
large, the plotter starts automatically cutting until it comes to the job that is too
large. It will display the message and cut the job, then stop and not cut any
remaining jobs until you press any key.
,QD YKNN PQV HKV
5NGY TKIJV VQ CFLWUV
+IPQTG
#WVQHKV
5NGY ( ( %CPEGN