Gerber enVision, Руководство пользователя, Страница: 12 / 80

8 enVision Owner’s Guide
The message display shows menus, instructions, system and job
status, and messages. Each menu has a title (for example, MAIN
MENU). You step through menus by pressing function keys.
The F1, F2, F3, and F4 function keys select other menus and change
parameter values or settings. Their function is based on the text in
the screen associated with each function key.
Slew keys move the tool head and/or the material. The left or right
slew keys move the tool head left or right. The up or down slew keys
move the material forward or backward. Slewing speed starts slowly.
It increases when you continue to hold down the slew key for a few
seconds. Quickly pressing and releasing a slew key will move the
plotter in increments of 0.001".
Slew diagonally by simultaneously pressing the two slew keys
adjacent to the arrow that points in the direction you want to slew.
The ENTER key accepts and records settings when in a settings
menu, or returns to the MAIN MENU when in a submenu.
When a job is running, the CANCEL key stops all motion of the
plotter and terminates any job that is in the plotter, clearing it from
the plotter memory. When modifying a setting (such as corners,
speed, or pull down, for example), pressing CANCEL after changing
values will not save the changes nor will it cancel the job. However,
in the next menu that appears, pressing CANCEL does cancel the job
at that time.