Gerber enVision, Руководство пользователя, Страница: 24 / 80

20 enVision Owner’s Guide
Note: There is also a rule set menu selection item in the enVision
(Operational Setup menu, System, Rules, Select Rule Usage menu). If this
menu item is set to When Received, the GA overrides the rule set in the
plotter. If this menu item is set to Never, the enVision plotter ignores the
rule set sent from the GA and uses its own rule set for the material.
„
The Plotter Prompts check box is used when cutting EDGE jobs. for a
description of this feature, refer to the next paragraph.
Using the enVision with the EDGE
The enVision 375 is capable of cutting EDGE printed jobs as described in the
GERBER EDGE Owner's Guide. The following additional capabilities are
provided when cutting with the enVision plotter:
„
When the Plotter Prompts check box is turned off in the Plotter Settings
dialog box, the job starts when you press Start Job (F1 on the enVision
control panel). If the check box is turned on, the control panel displays the
job name, vinyl color, and vinyl family. At this time, you use the EDGE
eyepiece to register the knife with the registration target. After you
complete registration, when you press F4 the job starts.
„
When you send a job to the EDGE for printing from the plot program in GA
version 6.2 or higher, turn on the Center Target check box. This prints the
target in the center of the Y axis and makes it easier to install the eyepiece
in the tool head.