User Manual
Bodystik
BODYSTIK_MAN_ENG_V1.2.2_REV01.DOCX
Page 8
2.2.3
Installation of demand valve (only option CO Diffusion)
If the Bodystik includes the option CO Diffusion the demand valve has
to be connected additionally. Therefore move the demand valve (1)
as far as it will go into the closing head, just like shown in picture (2).
After that, connect the junction cable of the demand valve with the
jack of the electric unit.
At last connect the gas sample hose (1) with the Luer Connection of
the closing head and after that the gas supply hose (2) with the
compressed air supply of the stand.
1
2
2
1
