User Manual
Bodystik
BODYSTIK_MAN_ENG_V1.2.2_REV01.DOCX
Page 6
2.2
Setup
It is recommended to the Installer to install the system in a way that
allows an optimal use of the complete system.
It is recommended to the operator to perform all described methods
to clean, setup, sterilize and disinfect the device.
Before testing with the Bodystik multiple components have to be
connected with each other as well as the USB connection has to be
established.
On request Geratherm Respiratory provides diagrams,
parts lists, descriptions, setting instructions as well as
other documents, which could help the operator to
setup, maintain and repair the device.
2.2.1
Electronic Unit
Connect the closing head (2) of the shutter unit to the dovetail
groove at the holder plate of the stand (3). After this plug the body of
the electric unit (1) as far as it will go onto closing head.
Ensure that all connections are connected accurately
and without too much power.
After this connect the junction cable of the electric unit to the jack (3)
at the bottom of the stand.
1
2
3
