Instructions for Use
Diffustik / Variant PFTstik
Serial no.: xx|8|401|yyy and 2401xxxxx
Page 60
Version: 8 | Release date: 16. August 2021
6.2.3
Inserting the Flow Sensor
1.
Open the closing clap [2]
on the flow unit
For this:
Turn the closure panel [1] on the left
and right side
and
Open the closure cap [2] upwards.
2.
Insert flow sensor [3]
For this:
Carefully press the patient-far side with
connection piece [3b] into the holder
with silicone seal [4].
Press the patient-close side [3a] into
the receptacle.
3.
Close and lock the closure panel
For this:
Proceed in reverse order as described
in point 1.
Attention
SI093
Measurement function
could be impaired.
Therefore:
Make sure that the
sensor pins [3a] inserted
in the silicone seal [4]!
2
1
1
3b
4
3
a
4
3
a
3b
