Web Management
4
4.2.5.2 Security - Network
4.2.5.2.1 Security - Network - Port Security - Switch
This page shows the Port Security status. Port Security is a module with no direct
iguration comes indirectly from other modules - the user
software-based learning. In this mode, frames from unknown MAC
d on to the port security module, which in turn asks all user
e set in the forwarding state, all enabled user modules must
sly agree on allowing the MAC address to forward. If only one chooses
a legend of user modules
ser Module Legend
he legend shows all user modules that may request Port Security services.
configuration. Conf
modules. When a user module has enabled port security on a port, the port is
set-up for
addresses are passe
modules whether to allow this new MAC address to forward or block it. For a MAC
address to b
unanimou
to block it, it will be blocked until that user module decides otherwise.
The status page is divided into two sections - one with
and o
us.
ne with the actual port stat
U
T
User Module Name
he full name of a module that may request Port Security services.
T
Abbr
one-letter abbreviation of the user module. This is used in the Users column in
e port status table.
ort Status
he table has one row for each port on the selected switch in the stack and a
umber of columns.
A
th
P
T
n
Port
he port number for which the status applies. Click the port number to see the
tatus for this particular port.
T
s
241
