PRI
Priority of Interface.
ontrol frame priority level generated by the system. These
terface priority value
It indicates the MLD c
values can be used to prioritize different classes of traffic.
The allowed range is 0 (best effort) to 7 (highest), default in
is 0.
RV
Robustness Variable.
le allows tuning for the expected packet loss on a link.
The Robustness Variab
The allowed range is 1 to 255, default robustness variable value is 2.
QI
Query Interval.
al is the interval between General Queries sent by the Querier.
The Query Interv
The allowed range is 1 to 31744 seconds, default query interval is 125 seconds.
QRI
Query Response Interval.
elay used to calculate the Maximum Response Code
seconds, default query response
The Maximum Response D
inserted into the periodic General Queries.
The allowed range is 0 to 31744 in tenths of
interval is 100 in tenths of seconds (10 seconds).
LLQI
Last Listener Query Interval.
al is the Maximum Response Delay used to
cific
ery
The Last Listener Query Interv
calculate the Maximum Response Code inserted into Multicast Address Spe
Queries sent in response to Version 1 Multicast Listener Done messages. It is
also the Maximum Response Delay used to calculate the Maximum Response
Code inserted into Multicast Address and Source Specific Query messages.
The allowed range is 0 to 31744 in tenths of seconds, default last listener qu
interval is 10 in tenths of seconds (1 second).
URI
Unsolicited Report Interval.
al is the time between repetitions of a node's initial
The Unsolicited Report Interv
144
