86
To enable connection to Video Gateway / Recording Server:
1.
Activate Link:
Enable the monitoring through Video Gateway / Recording Server.
2.
Host Name or IP Address:
Type the host name or IP address of the Video Gateway /
Recording Server.
3.
Port Number:
Match the communication port specified on Video Gateway / Recording
Server. Or keep the default value 50000.
4.
User Name:
Type a valid user name to log into Video Gateway / Recording Server.
5.
Password:
Type a valid password to log into Video Gateway / Recording Server.
6. Click
Apply.
The Connection Status should display “Connected” and connected time.
You can also find on this Video Gateway / Recording Server settings page:
Enable schedule mode:
Starts the monitoring through Video Gateway based on the
schedule you set in the
Select Schedule Time
section. Refer to
5.5 Recording Schedule
for the same settings.
Note:
The three functions,
Cease motion detection messages from, Cease input trigger
message from
and
Stop all notifications from
, are not functional.