GeoVision GV-IP Speed Скачать руководство пользователя страница 48

Страница: 48 / 164

Necessary items for the Dome of Outdoor Type:

•

GV-IP Speed Dome (Outdoor Type)

•

Outdoor Mount Kit (supplied)

•

Data Cable (supplied)

•

Ethernet Cable

•

Standard/Mini Pendent Mount (optional)

•

Pole Thin Direct Mount (optional)

•

Waterproof Rubber (supplied)

•

M5 Standard/Security Screw (supplied)

•

Stainless Steel Straps (supplied with Pole Thin Direct Mount) for fixing the Pole Think
Direct Mount to the wall

Follow the steps:

1. Fasten the Pole Thin Direct Mount on a pole with supplied Stainless Straps.

2. Run the Data and Ethernet cables through the hole on the Pole Thin Direct Mount.

3. Run the cables through the Standard/Mini Pendent Mount and fasten the Standard/Mini

Pendent Mount onto the Pole Thin Direct Mount with the supplied screws and washers.

4. Block the cable entry hole with the supplied sponge to prevent insects from entering the

Pendent Mount. See Figure 2-24.

5. Attach the Waterproof Rubber to the Standard/Mini Pendent Mount.

6. Run the cables through the Indoor/Outdoor Mount Kit and join the Indoor/Outdoor Mount

Kit to the Standard/Mini Pendent Mount with the supplied screws and washers. Then
adjust the Waterproof Rubber to the joint.

7. Connect the cables to the GV-IP Speed Dome.

8. Join the Dome to the Indoor/Outdoor Mount Kit with the supplied M5 screw and washers.

Содержание GV-IP Speed





































































































































































Результаты поиска

Содержание GV-IP Speed

Отзывы:

GeoVision GV-IP Speed, Руководство пользователя, Страница: 48 / 164

Результаты поиска

Содержание GV-IP Speed

Отзывы: