GeoVision GV-IP Speed Скачать руководство пользователя страница 154

Страница: 154 / 164

144

9.6.2 Accessing Live View

You can tap the information button

at the top-right corner to see the connection

information.

Figure 9-19

The buttons below are available when the iPhone, iPod Touch or iPad is positioned vertically.

Icon

Name

Function

Screen division Displays up to four channels on the same page if the GV-IP device

supports multiple channels.

PTZ control

Enables PTZ control. Drag across the camera live view screen to
adjust the camera position. The following buttons are available:

•

: Zooms in and out.

•

: Adjusts the focus.

•

: Moves the camera back to Home position.

•

: Adjusts the iris. (GV-SD010 only)

•

: Moves the camera to a preset point by typing the preset

number.

Snapshot

Saves the current image in the mobile device.

I/O Device

Tap a number to force the output device to be triggered. The I/O

icon

will be highlighted briefly when I/O is triggered.

Note:

The PTZ control and I/O device functions are only accessible on devices with PTZ

control and I/O devices.

Содержание GV-IP Speed





































































































































































Результаты поиска

Содержание GV-IP Speed

Отзывы:

GeoVision GV-IP Speed, Руководство пользователя, Страница: 154 / 164

Результаты поиска

Содержание GV-IP Speed

Отзывы: