GeoVision GV-IP LPR-DL Скачать руководство пользователя страница 74

Страница: 74 / 122

1. To configure the tampering alarm, select the

Enable

2. If you want the camera to ignore any movement or scene change in certain areas, click

draw the areas to be ignored on the camera view.

3. Select the desired detection sensitivity by moving the slider. The higher the value, the more

sensitive the camera is to scene changes.

4. In the

Tolerance Time of Alarm

field, specify the time length allowed for scene changes before

an alarm is generated.

5. In the

Duration of Alarm

field, specify the duration of the alarm after which the triggered output

device will be turned off.

6. To trigger an alarm when the scene turns dark, e.g. when the lens of camera is covered,

make sure the

Alarm for Dark Images

option is enabled.

7. Click

Apply

to save all the settings.

When the camera has been tampered with, the output alarm can be activated. To turn off the
alarm immediately, return to this setting page and click

Restart Detection

Содержание GV-IP LPR-DL



























































































































Результаты поиска

Содержание GV-IP LPR-DL

Отзывы:

GeoVision GV-IP LPR-DL, Руководство пользователя, Страница: 74 / 122

Результаты поиска

Содержание GV-IP LPR-DL

Отзывы: