GeoVision GV-IP LPR-DL Скачать руководство пользователя страница 67

Страница: 67 / 122

Administrator Mode

3.4 Image

This section covers all settings that can be applied to the live and recorded video images,
including

OSD & Text Overlay

Watermark Setting

Privacy Mask

and

Visual Automation

3.4.1 OSD & Text Overlay

[Text Overlay Settings]



Camera Name:

Give a name for the camera, which can be displayed on the video image.



Overlay with:

Select to overlay any of the following on the live and recorded videos.



Camera Name:

Displays the name of the camera.



Date:

Displays the date.



System Time:

Displays the local time of the camera.



Name of the associated digital input:

Select to display one of or both Input 1 and 2.

[Text Overlay Settings (OSD)]

Displays the camera name, date, and/or time on the live view

and recorded videos when viewing through GeoVision software and third-party software
through ONVIF and RTSP.



Camera Name:

Type the camera name.

Содержание GV-IP LPR-DL



























































































































Результаты поиска

Содержание GV-IP LPR-DL

Отзывы:

GeoVision GV-IP LPR-DL, Руководство пользователя, Страница: 67 / 122

Результаты поиска

Содержание GV-IP LPR-DL

Отзывы: