Administrator Mode
63
3
[Digital Output 2 – Normal State]
Trigger Option:
Select a trigger option from
Control Built-in IR Light
,
Control External
IR Light
or
As Configured by Digital Output Alerts
.
Control Built-in IR Light:
Select to turn on/off the built-in IR light upon trigger.
Control External IR Light:
Select to turn on/off the external IR light upon trigger.
As Configured by Digital Output Alerts:
Select to set Output 2 with settings similar
to that of Output 1.
IR Check Function:
By default,
Trigger IR by D/N
is selected to automatically turn the IR
light on or off based on the amount of light detected. Optionally select
On
or
Off
to always
keep the IR light on or off, respectively.
3.5.3 I/O Schedule
Users can set the schedule for which the I/O to operate.
For details of setting schedules, see
FTP Schedule
,
3.2.3 FTP Settings
.
3.5.4 Tampering Alarm
Tampering Alarm is used to detect and alert for when the camera is being physically tampered
with. An alarm can be generated when the camera is moved, covered up, or out of focus. The
alarm types include triggering connected output device(s), sending e-mail alert and notifying
the connected GV-Software. For this function to work, set up at least one of the following:
To trigger an output device when a tampering event occurs, enable the output setting and
select
Tampering Alarm
. See
3.5.2 Output Settings
.
To trigger the e-mail alert when a tampering event occurs, enable the e-mail setting and
select
Tampering Alarm
. See
3.2.4 E-Mail
.
To notify the desired GV-Software when a tampering event occurs, enable the connection
accordingly. See
3.8.1 Center V2, 3.8.2 VSM
(Vital Sign Monitor)
and, 5.1 Setting up IP
Cameras on GV-DVR / NVR, and 5.2 Setting up IP Cameras on GV-VMS
.