GeoVision GV-FD1200 Скачать руководство пользователя страница 2

Страница: 2 / 39

Under the copyright laws, this manual may not be copied, in whole or in

part, without the written consent of GeoVision.

Every effort has been made to ensure that the information in this manual is

accurate. GeoVision, Inc. makes no expressed or implied warranty of any

kind and assumes no responsibility for errors or omissions. No liability is

assumed for incidental or consequential damages arising from the use of

the information or products contained herein. Features and specifications

are subject to change without notice.

Note: no memory card slot or local

storage function for Argentina.

GeoVision, Inc.

9F, No. 246, Sec. 1, Neihu Rd.,

Neihu District, Taipei, Taiwan

Tel: +886-2-8797-8377

Fax: +886-2-8797-8335

http://www.geovision.com.tw

Trademarks used in this manual:

GeoVision

, the

GeoVision

logo and GV

series products

are trademarks of GeoVision, Inc.

Windows

and

Windows

are registered trademarks of Microsoft Corporation.

September 2015

Содержание GV-FD1200








































Результаты поиска

Содержание GV-FD1200

Отзывы:

Похожие инструкции для GV-FD1200

Бренды по названию

Популярные бренды

GeoVision GV-FD1200, Руководство по оборудованию

Результаты поиска

Содержание GV-FD1200

Отзывы:

Похожие инструкции для GV-FD1200

Бренды по названию

Популярные бренды