Fixed IP Camera
1
1.5 Connecting the Camera
Figure 1-20
1.
Use a standard network cable to connect the camera to your network.
2.
Optionally connect a speaker and an external microphone.
3.
Optionally connect a monitor using a Video Out wire. Enable this
function by selecting your signal format at the
TV Out
field on the
Web interface. See
4.1.1 Video Settings, GV-IPCam H.264 Firmware
Manual.
4.
Optionally connect to input / output devices. For details, see
1.6 I/O
Terminal Block
.
5.
Connect power using one of the following methods:
plugging the power adapter to power port.
using the Power over Ethernet (PoE) function and the power will
be provided over the network cable.
6.
The status LED of the camera will be on.
19
