GeoVision GV-BX2802 Скачать руководство пользователя страница 78

Страница: 78 / 80

Note:

and

cannot be displayed in the above interface via the plug-in free browser.

Additionally, for plug-in free playback, playback mode switch (balanced / real-time / fluent
mode) and downloading functions are not supported too.

The time table can be shown in 24H / 12H / 2H / 1H format by clicking the corresponding
buttons.

Video clip and downloading

1. Search the video files according to the above-mentioned steps.

2. Select the start time by clicking on the time table.

3. Click

to set the start time and then this button turns blue

4. Select the end time by clicking on the time table. Then click the

button to set the end

time.

5. Click

to download the video file in the PC.

Click

“Set up” to set the storage directory of the video files.

Click

“Open” to play the video.

Click

“Clear List” to clear the downloading list.

Click

“Close” to close the downloading window.

Содержание GV-BX2802

















































































Результаты поиска

Содержание GV-BX2802

Отзывы:

GeoVision GV-BX2802, Руководство пользователя, Страница: 78 / 80

Результаты поиска

Содержание GV-BX2802

Отзывы: