63
4.7.2 Online User
Go to Config
→
Security
→
Online User to view the user who is viewing the live video.
An administrator user can kick out all the other users (including other administrators).
4.7.3 Block and Allow Lists
Go to Config
→
Security
→
Block and Allow Lists as shown below.
The setup steps are as follows:
Check the
“Enable address filtering” check box.
Select “Block/Allow the following address”, IPv4/IPv6 and then enter IP address in the
address box and c
lick the “Add” button.
4.7.4 Security Management
Go to Config
→
Security
→
Security Management as shown below.
In order to prevent against malicious password unlocking,
“locking once illegal login” function
can be enabled here. If this function is enabled, login failure after trying six times will make the
login interface locked. The camera can be logged in again after a half hour or after the camera
reboots.
Trigger Email:
if enabled, e-mail will be sent when logging in/out or illegal login lock occurs.