15
Set the format, resolution and quality of the image saved on the SD card and the snapshot
interval and quantity and the timing snapshot here.
Snapshot Quantity
: The number you set here is the maximum quantity of snapshots. The
actual quantity of snapshots may be less than this number. Supposing the occurrence time of
an alarm event is less than the time of capturing pictures, the actual quantity of snapshots is
less than the set quantity of snapshots.
Snapshot Timing
Check the box for
“Enable Timing Snapshot” first and set the snapshot interval and schedule.
The setup steps of schedule are the same as the schedule recording (See
4.2 Image Configuration
4.2.1 Display Configuration
Go to Image
→
Display Settings interface as shown below. The image
’s brightness, contrast,
hue and saturation and so on for common, day and night mode can be set up separately. The
image effect can be quickly seen by switching the configuration file.
Brightness
: Set the brightness level of t
he camera’s image.
Contrast
: Set the color difference between the brightest and darkest parts.
Hue
: Set the total color degree of the image.
Saturation
: Set the degree of color purity. The purer the color, the brighter the image is.