Geotech EcoSense EC300A Скачать руководство пользователя страница 2

WARRANTY

The EcoSense® EC300A/EC300M Instrument is warranted for one year 
from date of purchase by the end user against defects in materials 
and workmanship. EC300A/EC300M probes and cables are warranted 
for one year from date of purchase by the end user against defects in 
material and workmanship. Within the warranty period, YSI will repair 
or replace, at its sole discretion, free of charge, any product that YSI 
determines to be covered by this warranty. 

To exercise this warranty, write or call your local YSI representative, 
or contact YSI Customer Service in Yellow Springs, Ohio. Send 
the product and proof of purchase, transportation prepaid, to the 
Authorized Service Center selected by YSI. Repair or replacement will 
be made and the product returned, transportation prepaid. Repaired 
or replaced products are warranted for the balance of the original 
warranty period, or at least 90 days from date of repair or replacement. 

Limitation of Warranty 

This Warranty does not apply to any YSI product damage or failure 
caused by: (i) failure to install, operate or use the product in accordance 
with YSI’s written instructions; (ii) abuse or misuse of the product; 
(iii) failure to maintain the product in accordance with YSI’s written 
instructions or standard industry procedure; (iv) any improper repairs 
to the product; (v) use by you of defective or improper components or 
parts in servicing or repairing the product; or (vi) modification of the 
product in any way not expressly authorized by YSI.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED 
OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE. YSI’s LIABILITY UNDER 
THIS WARRANTY IS LIMITED TO REPAIR OR REPLACEMENT OF THE 
PRODUCT, AND THIS SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY 
FOR ANY DEFECTIVE PRODUCT COVERED BY THIS WARRANTY. 
IN NO EVENT SHALL YSI BE LIABLE FOR ANY SPECIAL, INDIRECT, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM 
ANY DEFECTIVE PRODUCT COVERED BY THIS WARRANTY

Contact Information

YSI
1725 Brannum Lane
Yellow Springs OH, 45387, USA
Tel: 800-897-4151 • 937-767-7241; Fax: 937-767-1058
E-mail: [email protected]
Web: ysi.com

606042REF-B-EC300A-EC300M-Manual-English.indd   2

12/11/2017   10:07:39 AM

Содержание EcoSense EC300A





















Отзывы: