Geotech 28738, Руководство пользователя

Страница: 14 / 18

GEOTECH PVT REMOTE GATEWAY Manual 2015-11-30
10
Installation 3.3
Mount the Gateway vertically with cable outlets facing down. Bracket for mounting on a 1” standard size
water pipe is available as option.
Insert piezometer cables and connect them to the terminal blocks. If used outdoors, please pay attention
to the water tightness of the gaskets.
You may now set up and check gateway and sensor properties (refer to User’s Manual for “PVT Gateway
setup software”).
Remove the USB cable and mount the micro USB outlet protector.
Close the “big box”.
4 Maintenance
Charging of batteries 4.1
It makes sense to have access to a spare battery. Charge the battery for 12 hours, using the “PVT Gate-
way battery charger”. The gateway will keep its settings for a few seconds. If settings are lost by the
gateway, they will be restored upon next contact with the server.
Equipment containing Lithium Ion Batteries
The gateway is powered by a Lithium Ion battery that must be handled with care as a flammability
hazard exists. Do not short-circuit, mishandle or disassemble the battery.
Equipment containing Lithium Ion Batteries
When sending a gateway together with maximum one spare battery by air, the package must have
a warning label and safety information. Please refer to appended transport instructions and rules
issued by your forwarder. Special rules apply to batteries not sent together with the equipment.
Never send damaged batteries by air.