9
© 2021GeoSLAM ZEB
‐
GO User Guide v1.0.7
3.3
DOWNLOADING THE RAW SCAN DATA
To download the raw scan data, switch on the ZEB-DL2600 data logger or leave it running after a scan is complete and the data
has compressed (Step 5 above). Connect the DL2600 download cable to the AUX socket (with blue socket marker) and connect
the supplied USB memory stick to the download cable. The AUX LED light will light green whilst the data is transferring to the
memory stick. The USB stick must not be removed when the AUX LED is lit green. After a few seconds (dependent on the size
of the data files to be transferred) the AUX LED will turn off. All data that has not previously been transferred will be transferred
and the USB memory stick can be removed.
!
Do not remove the USB memory stick while the green AUX LED is lit
If there is a problem with the USB memory stick, for example there is insufficient capacity or the format is not recognised the
AUX LED will flash red. The raw data will remain on the internal memory of the data logger. The following memory stick file
formats are supported, exFAT, FAT16, FAT32 and NTFS.
Downloading data is an automatic process whereby only data that has not previously been downloaded will be transferred.
Please refer to section 7.1 Appendix 2
–
USB PREPARE TOOL for info on setup of the USB device for data download.
3.4
FILE NAMING
Files are automatically named in accordance with the start date and time of the dataset recording (with respect to the time/date
set on the data logger clock).
An example file name for a dataset recorded at 13:41 on 31
st
August 2019 is:
2019-08-31_13-41-26.ZIP
The system date/time can be changed using the Prepare USB tool described in chapter 7.1.
3.5
SHUTTING DOWN
To shut the DL2600 data logger down press and hold the power button for 1 second. After the data logger is shut down the
battery cable should be disconnected from the battery to prevent the battery from being drained.
!
Disconnect the battery when not in use
