17
V1.1 May 2021
6.2.4 SELECT SENSOR CONT.
This screen may differ slightly based on sensor type selected. The controls are:
-
•
Readings
–
live readings will update on screen approximately every second. Up to 3
readings can be shown on screen at the same time for the same sensor (Digital
tiltmeter shows A
-
Axis, B
-
Axis and Temperature).
•
Raw Units / Engineering Units Selector
–
Will switch onscreen readings based on
information added during the sensor setup. Any calibration factors and engineering
units can be edited live whilst readings are being taken by pressing the edit sensor
button.
•
Set Site Zero
•
Save Readings
•
Stop Taking Readings
As the app shows the live readings, they are stored in a temporary internal buffer, these can
be saved so that readings are not missed
6.2.5 SITE ZERO READINGS
Whilst taking a reading it is not possible to change the selected sensor,
or delete the selected sensor. To do this, stop taking readings.
