
4
How to Use
This product is for household use only.
GETTING STARTED
• Remove all packing material, any stickers, and the plastic band around the
power plug.
• Remove and save literature.
• Please go to www.prodprotect.com/applica to register your warranty.
• Wash removable parts and/or accessories as instructed in CARE AND
CLEANING.
• Make sure appliance is OFF.
• Wipe inside of Contact Roaster and cooking surfaces with a damp cloth to
remove all dust.
• Select a location on your countertop where
unit is to be used, allowing enough space from
back of appliance and wall to allow heat to flow
without damage to cabinets and walls.
• Place drip tray under front section of bottom
cooking plate of Contact Roaster
(C)
.
Note:
Aerosol cooking spray should not be used
on nonstick surface. The use of aerosol sprays can
cause a build up on cooking plate surfaces and
reduce cooking efficiency.
COOKING
1. Make sure size of meat or poultry to be roasted fits into Contact Roaster before
preheating.
2. Plug Contact Roaster into a standard electrical outlet.
3. Press power ON/OFF button
( )
above the digital display; “5” will appear in
digital display and will alternate with “PH” (preheat). Timer will count down for
5 minutes while preheating occurs.
Note: For best results, preheat or cook with lid closed.
4. When preheating is complete, there will be an audible signal and “ON” will
appear on the digital display.
Note:
If desired cooking time is not entered, there will be a periodic audible signal
that Contact Roaster is ON and ready to cook.
5. Using pot holders, carefully open lid and insert food to be cooked.
Note:
Use only heatproof plastic or wooden utensils when placing or removing
food from Contact Roaster to avoid scratching nonstick surface. Do not use metal
tipped tongs, forks or knives; these can damage the nonstick surface.
6. Close lid. Set timer by pressing timer up (+) button until desired time appears
on digital display. Timer can be set to a maximum of 199 minutes (D).
C