Georg Fischer RA 21, Руководство по эксплуатации

Страница: 18 / 28

14
GEORG FISCHER +GF+¹
6.4 Using stops
Length gauge up to 250 mm
! Mount the length
gauge (1).
! Swing the stop (2) in
to the middle of the
pipe and engage.
! Release the cross
knob (3).
! Set to the desired
length. Use the scale.
!
Tighten the cross
knob.
! Push the pipe for-
wards up to the
stop and clamp.
! Swing the stop clear.
! Cut the pipe.
Length gauge over 250 mm
! Mount the length
gauge (1).
! Swing the stop in to
the middle of the
pipe.
!
Use a yardstick to
extend the stop to
the desired length.
! Push the clamp (2)
up against the
housing and turn it
so that it is in
contact with the
work bench.
2
3
1
1
2