Georg Fischer RA 21, Руководство по эксплуатации

Страница: 22 / 28

18
GEORG FISCHER +GF+¹
6.6 Cutting and bevelling the pipe
This procedure combines cutting and bevelling
of the pipe. When cutting and bevelling simul-
taneously, turn the pipe cutter more slowly
around the pipe that you would for cutting
alone, as two tools are used at the same time.
Put on safety goggles before cutting.
! Connect the pipe
cutter to the mains.
! Apply saw blade lu-
bricant to the saw
blade teeth/cutting
surface.
³ 1 m
³ 1 m
Repeat the lubrication every three cuts.
If in contact with drinking water or
foodstuffs, use only Georg Fischer
lubricating gel.
!
Mark the cutting
location on the
pipe.
! Insert the pipe in the
vise.
! Push the marked
cutting location over
the saw blade.
!
Clamp the pipe in
the vise.
Use a pipe support for pipes that are more
than 1 m long.