GeoMax Zoom80 R, Руководство пользователя

Страница: 17 / 54

Operation Zoom80
| 17
3.4 Fixing the handheld to a holder and pole
Components of the
ZHR200 holder
Fixing the handheld to
the holder step-by-step
3.5 Batteries
3.5.1 Operating Principles
Charging / first-time
use • The battery must be charged prior to using it for the first time because it is delivered with an energy
content as low as possible.
• The permissible temperature range for charging is between 0°C to +40°C/+32°F to +104°F. For
optimal charging we recommend charging the batteries at a low ambient temperature of +10°C to
+20°C/+50°F to +68°F if possible.
• It is normal for the battery to become warm during charging. Using the chargers recommended by
GeoMax, it is not possible to charge the battery if the temperature is too high.
• For new batteries or batteries that have been stored for a long time (> three months), it is effectual
to make only one charge/discharge cycle.
• For Li-Ion batteries, a single discharging and charging cycle is sufficient. We recommend carrying out
the process when the battery capacity indicated on the charger or on a GeoMax product deviates signif-
icantly form the actual battery capacity available.
Operation / Discharging • The batteries can be operated from -20°C to +55°C/-4°F to +131°F.
• Low operating temperatures reduce the capacity that can be drawn; high operating temperatures
reduce the service life of the battery.
Clamp
a) Locking pin
b) Tightening screw
c) Pole clamp
Holder
d) Tightening screw
e) Pin
a
b
c
e
d
Zenith20_017
Step Description
1. Insert the pole into the clamp hole.
2. Tighten the clamp with the tightening screw.
3. To attach the holder to the clamp insert the pin into the catch of the clamp while pushing down
the locking pin.
4. Place the handheld in the holder.
5. Tighten the screw of the holder to fix the handheld to the holder.