32/76
CAUTION: By default, the display area blanks out and
shows the word “standby” when the camera has been idle
for one minute. To resume, tap the screen.
3. Press the
key to take the picture.
4. The result shows on the screen if the picture was taken
in Normal or Timer mode. At this time, you can tap
“Menu” to perform a desired task to the current picture.
Tap “Camera” or “ok” to go back to the Camera screen.
5. The picture is saved to the predefined storage location
(as long as you didn’t delete it in the previous step).
5.5.4.2 4.5.4.2 Recording Video Clips
1. To start the program, press the
key on your device
or tap
/ Pictures & Videos/ Camera.
2. Tap Menu/ Video to switch to the video mode shown as
in figure 22. Below the display area are indicators of the
current status.
Figure 22
3. For recording controls, tap “Menu” shown as in figure
23.
