Geolink OpenTracker 2.4, Руководство пользователя

Страница: 10 / 27

www.geolink.io
10 OpenTracker 2.4 User Manual (1.4.0)
Change SMS password
Optionally, change SMS password by sending following SMS command:
#pass,smspass=NEW_PASSWORD
Example:
#pass,smspass=mynewpass
After changing the SMS password, the SMS commands should begin with your new password, like:
#mynewpass,COMMAND=ARGUMENTS
Please note, depending on the current status of the device, it may take a while until the SMS
response is sent.
SMS Commands
Summary of the SMS commands for the initial configuration. The unit will accept only one command at a
time and send a reply on successful command execution (this may take a while).
Command Syntax Example Reply
Set APN #PASS,apn=NEWAPN #pass,apn=internet APN saved
Set APN Username #PASS,gprsuser=NEWUSERN #pass,gprsuser=guest APN username saved
Set APN Password #PASS,gprspass=NEWPASS #pass,gprspass=guest APN password saved
Set SMS Password #PASS,smspass=NEWSMSPASS #pass,smspass=newpass SMS password saved
Set Sending Interval
(sec) #PASS,int=INTERVAL_SECONDS #pass,int=60 Interval saved
Set SIM Pin #PASS,pin=NEW_PIN #pass,pin=1234 PIN saved
Please allow some time for the device to reboot after the last SMS reply. Do not immediately
turn it off.
Register
To use the Geolink web interface (
www.geolink.io ) you need to register your OpenTracker device.
Please follow this guide: https://geolink.io/guide.php
Make sure your device is configured, powered and ignition is on, so that it connects to the
tracking server.