Geolink OpenTracker 2.4 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 27

background image

www.geolink.io

User Manual (1.4.0)

OpenTracker 2.4

27

How to get support

Please feel free to contact us with any questions, queries or suggestions.
If your question is about technical support or troubleshooting for one of our products, we kindly ask you to
check first our documentation for a possible solution.

If you cannot find the solution you are looking for, then please write to

[email protected]

providing all

possible details.

©

Geolink - a

ll rights reserved

Geolink assumes no responsibility for any errors, which may appear in this manual. Furthermore,  Geolink reserves the
right to alter the hardware, software, and/or specifications detailed herein at any time without notice, and does not make
any  commitment  to  update  the  information  contained  herein.  Geolink  products  are  not  authorized  for  use  as  critical
components in life support devices or systems.

OpenTracker  is  an  open  source  development  board  for  vehicle  tracking  applications  and  any  kind  of
certification/homologation for a final product based on this board is responsibility of the final developer/manufacturer.

OpenTracker contains open

source software subject to the GNU General Public License (“GPL”), the GNU Lesser

General Public License (“LGPL”), the MIT License and the SAM Software Package License. Each portion of the software
is copyright of their respective owners and contributors.

All the source code used in the OpenTracker, with its accompanying licenses

, is available from Geolink’s Git repositories

at:

https://github.com/geolink/opentracker

and

https://github.com/geolink/opentracker-arduino-board

«
...
25
26
27

Содержание OpenTracker 2.4




























Отзывы:

Нет отзывов

Похожие инструкции для OpenTracker 2.4

Бренд: Qiyang Страницы: 27

Бренд: Analog Devices Страницы: 8

Бренд: Gigabyte Страницы: 51

Бренд: Aaeon Страницы: 119

Бренд: ASROCK Страницы: 64

Бренд: Biostar Страницы: 31

Бренд: ECS Страницы: 82

Бренд: Ublox Страницы: 25

Бренд: OpenVox Страницы: 29

Бренд: Micrel Страницы: 10

Бренд: DG Страницы: 18

Бренд: Microchip Technology Страницы: 30

Бренд: DFI Страницы: 177

Бренд: IDT Страницы: 5

nForce 680i LT SLI

Бренд: XFX Страницы: 137

Бренд: LiteOn Страницы: 38

Бренд: AGP Страницы: 65

Бренд: Teridian Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды