Geokon GK-604D, Руководство пользователя

Страница: 53 / 117

41
3.3.5.2 Stability Filter
If the “Stable Indication” (see section 3.3.5.1) selection is set to something
other than “None”, this parameter will be enabled and a drop-down list will
facilitate the entry of a number that is used to determine readings stability
(a value less than 10 is recommended).
When taking live readings, if the difference between two subsequent
readings of the A and B channels are less than or equal to the “Stability
Filter” then the reading will be deemed stable and, if enabled, the “Stability
Indication” icon (see Figures 41 and 42) will be set accordingly.
3.3.5.3 Stable Sound
If the “Stable Indication” (see section 3.3.5.1) selection is set to
“Visual/Audible”, this parameter will be enabled and a drop-down list will
display the choices of “sounds” that the HHD can make when a stable
reading is achieved in the “Live Readings” screen (see Figure 41).
Tapping on the icon to the right of the “Stable Sound”
selection plays a preview of the actual sound heard.
3.3.5.4 Unstable Sound
If the “Stable Indication” (see section 3.3.5.1) selection is set to
“Visual/Audible”, this parameter will be enabled and a drop-down list will
display the choices of “sounds” that the HHD can make when the readings
achieved in the “Live Readings” screen are determined to be unstable (see
Figure 42).
Tapping on the icon to the right of the “Unstable Sound”
selection plays a preview of the actual sound heard.
3.3.5.5 Auto Record Data
If this selection is set to “Enable”, upon entry into the “Live Readings”
screen, the “Auto Record” feature will be enabled (see Figure 43).