Geokon GK-604D, Руководство пользователя

Страница: 24 / 117

12
2.2 Establishing Contact with the Remote Module
In general this should only need to be done once and is typically done before it
leaves the factory. Follow the steps below to ensure the ‘partnership’ with the
remote is established before using the readout software:
1. Use the Bluetooth Settings Manager on the hand-held PC to set up the link to
the remote. Read about setting up a Bluetooth “partnership” in Chapter 9 of the
Field PC’s Reference Guide.
2. Once in the Bluetooth Settings Manager, click on the
“Mode” tab and then make sure that the box next to
“Turn on Bluetooth” is checked.
3. Click on the “Devices” tab. If it shows a “Geokon”
device (name will start with “GK604” and contain the
remote’s serial number), go to step 6. Otherwise turn
on the remote module (should see a flashing blue
indicator on the remote) and select “Add new device…”.
Several ways to start the
Bluetooth Manager.