GeoCross VD-1500B, Руководство пользователя

Страница: 21 / 38

20
- Turn off the engine and remove the key from ignition.
- Check to see if the SD card is inserted into the unit.
- Turn on the engine
- When the engine is turned on, the system booting starts with the program
installed in the SD card and a voice notification will be announced.
- Then the REC and GPS lamps will turn on.
- The REC lamp will turn blue while blinking.
- The GPS lamp will turn red if no signal and blue if receiving signal.
- The GPS connection may take a couple of seconds to several minutes,
depending on the location of the vehicle.
Product Use
Start up