GeoCross VD-1500B, Руководство пользователя

Страница: 10 / 38

9
Installation Precautions
For safe installation and operation, carefully read all the information
stated below.
DO NOT disconnect the power supply while the system is booting up.
Be aware of engine ignition switching for they may disconnect power
for short periods of time.
It is recommended to only use authorized SD cards with the VisionDIt is
recommended to only use authorized SD cards with the VisionDrive™.
products.
(The VisionDrive™ programs are installed in the SD card for the product
to function properly.)
Install the product after parking your vehicle in a bright and safe area.
Install the system when ignition is off, especially after the power source
has been turned off completely.
Use the power cable provided with the product for the cigarette lighter
power connection for power in the range of DC12V to DC24V. If power
wiring is involved, we recommend a professional service for the
installation.
Prior to the installation, clean the area of the installation where the
camera will be positioned.
DO NOT eject the SD card while the product is in operation.
Eject the SD card only after the power is turned off completely.