GENUINE Blur 150, Руководство по обслуживанию

Страница: 3 / 186

PERIODICAL MAINTENANCE TABLE
In order to achieve safe riding, good performance and reduce pollution, please execute the recommended
maintenance accordingly.
MONTHS/DISTANCE(IN KM)FOR CHECKING
Item
Model
4T
Checking Content
1 or
190
mile
3 or
1865
mile
6 or
3730
mile
9 or
5595
mile
12 or
7460k
mile
15 or
9320k
mile
18 or
11185
mile
Engine oil* 4T BLUR-150:800cc, total 1000cc
BLUR-220: 1,000CC, total1,200cc R Replace it initially 300km,
and then replace it per 3000 km
Oil Filter BLUR -150
BLUR -220 Replace R replace it per 6000km
Coarse oil filter* (on
oil draining bolt) 4T
Clean or replace it if necessary C
clean it initially 300km,
and then replace it per 6000 km if necessary
Air cleaner 4T Crack and blockage check. I I I I I I
Air filter 4T Clean or replace it if required I I I R I I
Gear oil* 4T BLUR -150: 90cc, total 110 cc
BLUR -220: 90cc, total 110 cc R R R R
Disk & drum brake 4T Leaking and function check I I I I I I
Clutch shoes* 4T Check or replace it if necessary I R I
Tires 4T Worn-out check or replace it if
necessary I I I I I I
Wheel bearing* 4T Fasten tightly if loosen I I I I I I
Front fork* 4T Leaking and function check I I I I
4T
1 or
190
mile
3 or
1865
mile
6 or
3730
mile
9 or
5595
mile
12 or
7460k
mile
15 or
9320k
mile
18 or
11185
mile
Steering head bearing* 4T Check looseness. Adjust it if
required A A A
Rear absorber* 4T Leaking and function check I I I
Main/Side Stand 4T Function check or replace it if
required I L I L I L
Nuts, bolts, fasteners 4T Tighten it if required I I I I I I
Battery 4T Recharge the battery it required.
Clear the poles.
I C I C I C
Valve gap* 4T BLUR -150: 0.08mm/ IN&EX
BLUR 220: 0.08mm/ IN&EX
Adjust it when necessary
Spark plug* 4T Clear or replace if required I R I R I R
V belt* 4T Worn out check or replace if
necessary.
A A A
Fuel feeding system* EXCEPT
EMS
Crack and blockage check.
Replace it if necessary.
I R I
Fuel feeding system * EMS ONLY
(Injection)
Inspect hose, clamp, and replace
the filter per 15,000km I I R
Engine idle speed* 4T 4T engine: 1700±100 rpm A A A A A A A
Carburetor idle A/F
Adjustment* 4T Check and adjust referring to
CO/HC Percentage.
A A A A A A A
EMS function check* EMS ONLY
(Injection)
Inspect EMS function, and clear
the defect memory if necessary I I I I I I
REMARKS
： ： ： ：
1. A: adjust C: clean I: inspect, or replace if necessary L: lubricate R: replace
2. Items with “*” mark indicate our recommendation to have it done by Genuine dealer.
NOTE 1
：
： ：
：
For 4T engine, the engine oil shall be changed completely after run-in period 300km or one month later.
This can make sure the engine runs smoothly.
NOTE 2
： ： ： ：
The exchange of brake fluid
1. After disassembling of brake main cylinder or caliper, do change the new fluid.
2. Check the fluid level often, Refill if necessary.