EN
Instructions Manual - CLINIC SW-Mi3000
9
© Gentilin SRL - 50101035.05.21
» Check the motor status to see if it is abnormal. If abnormal bearing sound of the motor
is detected, contact authorized dealer for inspection.
» Check the plastic hose or joint whether any leakage problem is occurring. If necessary,
replace parts as needed.
•
Every 5 ~ 7 years:
» Replace the motor bearing, and rubber parts like O-Ring and gasket.
Cleaning Suction inlet filter
Cleaning procedures of filter component.
•
Pull out filter component from machine in a clockwise direction of cover.
•
Clean filter in running water to remove particles or debris. (It is recommended to clean it
at least twice per month to avoid reduction of suction power.)
•
Reconnect filter. (Please be sure that filter fits into filter housing opening correctly.)
•
When the clinic facility closes for an extended period of time like summer holiday, please
leave filter removed. It helps keep the separator dry.
Cleaning Suction Unit
After every treatment – To avoid bad odor and reduce the possibility of infection, the operator
should draw/suck one glass of water before the next treatment.
After finishing last treatment of the day – To avoid bad odor and reduce the possibility of
infection, the operator should clean the suction unit with NON-FOAMING cleaning and
disinfectant solution.
CAUTION!
