EN
Instructions Manual - CLINIC SW-Mi3000
© Gentilin SRL - 50101035.05.21
6
IMPORTANT!
This semi-wet suction system is Class 1 Equipment and shall to be installed by qualified
personnel.
Never operate this product if it has a damaged power cable or plug. If it is not working
properly, has been dropped, damaged or has fallen into water, please contact the appropriate
service center for inspection and repair.
Keep the power cable away from heated surfaces. All electrical products generate heat. To
avoid serious burns, NEVER touch suction motor during or immediately after operation. The
temperature to suction motor can reach 120°C.
Never block any air exhaust valve or position the device on a soft surface where the openings
may be blocked. The air exhaust valve is for ventilation of the motor inside the housing. Keep
the air exhaust valve free of lint, dirt and other foreign objects.
Use only in well-wentilated areas. Be sure to properly identify intake and discharge ports
before using machine.
Do not disassemble. Disassembly or attempted repairs if done incorrectly can create electrical
shock hazard or product damage. Defer servicing to qualified service centers only.
Do not use this product in or near areas where it may fall or be pulled into water or other
liquids. Do not reach for this product if it has fallen into liquid. Never operate this product
outdoors in the rain or in a wet area.
INSTALLATION
Suction Inlet Hose Connection
•
Remove the cover of suction inlet and push-in tubing connector into the inlet opening.
•
Connect suction inlet hose (Ø32, spiral hose) at tubing connector and secure with
electrical insulation tape.
www.gentilinair.com - PROPRIETA' RISERVATA "GENTILIN" S.r.l. - A TERMINI DI LEGGE E' VIETATO RIPRODURRE O COMUNICARE A TERZI IL CONTENUTO DI QUESTO DISEGNO
01/09/2020
UPDATE
CODE
www.gentilinair.com - PROPRIETA' RISERVATA "GENTILIN" S.r.l. - A TERMINI DI LEGGE E' VIETATO RIPRODURRE O COMUNICARE A TERZI IL CONTENUTO DI QUESTO DISEGNO
01/09/2020
UPDATE
CODE
