EN
Instructions Manual - CLINIC SW-Mi3000
© Gentilin SRL - 50101035.05.21
12
WARRANTY
1.
WARRANTY DECLARATION: the Manufacturer guarantees to the End User the
replacement, or repair or intervention relative to all appliances, where the machine has
non-conformities which hinder the correct use and operation, only where such non-
conformities are due to the fault of the Manufacturer. The Manufacturer reserves the
right to adopt the best solution in order to restore the appliance conformity within a
reasonable amount of time. Warranty does not cover the parts of the machine subject to
normal wear and/or deterioration, or defects resulting from inadequate transport.
2.
END USER: End User is the natural or juridical person who purchases the machine to
directly use it. An End User who buys the machine as a natural person for purposes
that do not fall within the scope of commercial or professional activity is defined as
“consumer”. The End User is considered as a “professional or company” when the
purchase is made by a professional or company acting for purposes falling within the
scope of his commercial or professional activity.
3.
TERMS: The Manufacturer is liable to the End User when the lack of conformity occurs
within the 36 months from the purchase date. Replacements or repairs under warranty
will not extend the warranty period as originally envisaged, the expiry of which remains
unchanged.
4.
VALIDITY: the warranty is valid if the End User notifies the Manufacturer of any lack of
conformity within 2 months from the date on which the non conformity was detected,
but in any case within the final term stated here-above in clause 3. The above mentioned
notification must necessarily be accompanied by a regular proof of purchase (till receipt
or invoice).
5.
EXPIRY: the warranty expires in case of inappropriate use of the machine, or in case of
violation of the instructions of the “Instruction Manual” supplied by the Manufacturer, or
in case the non conformity is due to inexperience of the user or to a fortuitous accident.
Use of the machine after the discovery of defects will free the Manufacturer from any
warranty obligation or liability.
6.
RESPONSIBILITY: The Manufacturer is exempted from any responsibility deriving from
any damage to the End User, deriving from the loss or reduction of production, resulting
from any lack of conformity.
7.
COSTS AND FEES: The End User is entitled to obtain the restoration of the conformity
of the machine under warranty without paying labor or material costs. The shipping
methods are to be agreed with the authorized dealer or with the Manufacturer. In the
event that the non-conformity is not due to the Manufacturer’s fault or in case the
warranty has expired, the Manufacturer can charge the End User both with the transport
and repair costs that will be indicated by the authorized dealer or by the Manufacturer.
