GENTILIN C 330/50, Инструкция по эксплуатации

Страница: 29 / 198

7
EN
Rev. 00 - 12/2013 - Cod. CM31710 - Instruction manual
Compressor Mod. CS240
5. IMPORTANCE OF THE MANUAL
BEFoRE USinG tHE aPPlianCE in QUEStion, aUtHoRiSED USERS MUSt REaD anD UnDERStanD tHE
PRESEnt inStRUCtion ManUal in itS EntiREtY.
• The “Instruction Manual” was compiled according to the instructions as specified in
Machinery Directive 2006/42/CE
,
in order to guarantee easy and correct understanding of subjects relevant to operators authorised to use and oversee
maintenance of the appliance in question. Should operators find errors, please do not send incorrect personal inter-
pretations/amendments that may threaten safety, rather, we advise you immediately request the Manufacturer send
the correct explanations or further details.
• The “Instruction Manual” must be accessible by authorised operators at all times and must be always be kept in a safe
place within close proximity of the appliance.
tHE PRESEnt inStRUCtion ManUal FoRMS an intEGRal PaRt oF tHE aPPlianCE anD MUSt BE KEPt
FoR FUtURE REFEREnCE anD UP Until tHE EnD oF aPPlianCE liFE. it MUSt alWaYS BE aCCESSiBlE to
aUtHoRiSED oPERatoRS anD it MUSt BE SaFElY StoRED anD KEPt WitHin CloSE PRoXiMitY oF tHE
aPPlianCE itSElF.
tHE ManUFaCtURER DEClinES anY RESPonSiBilitY FoR DaMaGE to PERSonS, aniMalS anD oBJECtS CaU-
SED BY inoBSERVation oF REGUlationS anD WaRninGS DESCRiBED in tHE PRESEnt inStRUCtion ManUal.
in tHE inStanCE WHERE tHE inStRUCtion ManUal iS loSt oR DaMaGED, RERQUESt a CoPY FRoM tHE Ma-
nUFaCtURER oR tHE aUtHoRiSED SUPPliER, SPECiFYinG tHE aPPlianCE MoDEl anD tHE EDition nUMBER
PRoViDED WitHin tHE titlE.
tHE PRESEnt inStRUCtion ManUal CoMPliES WitH tECHniCal PRoViSionS at tHE tiME oF PURCHaSE oF
tHE aPPlianCE anD Cannot BE ConSiDERED inCoRRECt in tHE inStanCE WHEREnEWEXPERiMEntation
RESUltS in UPDatES oF SUCH tECHniCal PRoViSio.
tHE PRESEnt inStRUCtion ManUal MUSt BE PaSSED oVER in tHE inStanCE WHERE tHE aPPlinaCE iS Han-
DED oVER to anotHER USER.
6. RECIPIENTS
• This “Instruction Manual” is aimed exclusively at operators authorised to carry out operations according to specific
technical skills necessitated for the operation type.
• The below described symbols appear at the beginning of paragraphs in order to indicate the identity of operators
affected by the subject described.
4. CE LABEL
The CE label serves as evidence of the appliance’s compliance with essential health and safety requirements as specified
by the Machinery Directive 2006/42/CE .
It takes the formof a polyester sticker, with a black thermal transfermould, which are applied on themotor frame.
Right side